RD-TECH PORTABLE INSTRUMENT
> Omniscan
 |
The
OmniScan™ is built to work in the harshest field conditions. Its
solid polycarbonate-based casing and rubber bumpers make it a splash-proof
instrument that can withstand drops, shocks, and hits, as well as water
jet cleaning. This portable instrument is a modular platform that supports various technologies such as: • Ultrasonics • Phased array • Eddy current • Eddy current array |
> Multiscan MS 5800
 |
High
Speed – Multi Channel – Multi Frequency The new powerful Multiscan MS5800 acquisition unit pushes the limit of NDT inspection with its all-in-one solution. Multiscan MS5800 can be equipped with single or multiple modules of: • Eddy Current • Remote Field Testing (RFT) • Magnetic Flux Leakage (MFL) • Ultrasonics IRIS • Eddy Current Array • Corrosion Mapping |
> Tomoscan Focus LT
 |
The
Tomoscan Focus LT is RD Tech’s newest powerful, flexible and compact
combined Phased Array and conventional Ultrasonics (TOFD & P/E) data
acquisition instrument. The system supports up to 4 transducers of 32
elements in pulse-echo configuration or any combination of transducers
up to 128 elements. |
> Tomoscan Focus
 |
R/D
Tech's Tomoscan FOCUS is, by far, the most widely used NDT phased array
system in the world. The FOCUS provides a revolutionary tool for UT data
acquisition, allowing variation of the beam angles, focal distances, and
focal spot under software control. Beam Multiplexing often allows the
elimination of one axis of motion, replacing raster scans and helix scans
with a single axis scan, resulting in scan speeds that are 10 to 50 times
faster. The system supports up to 4 transducers of 32 elements in pulse-echo
configuration or any combination of transducers up to 128 elements. |
> µTomoscan
 |
The
µTomoscan is our most economical multi-channel UT system. It allows
the use of pulse-echo, transmission technique and time-of-flight-diffraction
technique (TOFD). It features both logarithmic and linear amplifiers.
The µTomoscan is ideal for in-service inspection that requires automated
data acquisition, real-time imaging, flaw sizing, etc. • Up to 8 internal ultrasound channels • Pulse-echo, time-of-flight diffraction, or transmission modes on any channel • 20 kHz pulsing rate (PRF) • 100 MHz, 8-bit A/D converter • DAC curves • Real-time waveform averaging, data compression, and waveform recording • Two measurement gates and one synchronization gate per channel • Logarithmic and linear amplifiers |
> Tomoscan III
|
|
Others
RD Tech Product:
• Inspection
System
• Automated
System
• On-line
Instrument
| > O t h e r M a n u f a c t u r e r |  |