Tubing Inspection

The R/D Tech MultiScan MS5800 is a multi-technology system offering these modular technologies in one instrument:

• Eddy Current
• Magnetic Flux Leakage
• Remote Field
• IRIS Ultrasound
  

MultiScan MS-5800E Edy Current Key Features

• 4 simultaneous frequencies per input
  This feature allows inspection speed up to 2 m/s with 4 absolute and 4 differential frequencies without signal distortion.
• Electronic probe balancing
  No separate external reference probe is required for absolute channel operation.
• 4 ECT inputs and up to 64 multiplexed channels The MS-5800E can support a large number of ECT channels to perform array-probe inspection. Compared to single channel inspection, the array-probe technology allows faster and easier surface coverage.

MultiScan MS-5800R RFT and MFL Key Features

• RFT with up to four different frequencies and real-time mixes
  This feature allows more flexibility for mixing and defect validation. The detection and sizing of flaws at the support plate becomes easier with multifrequency inspections and dual-driver operations.
• RFT with frequencies ranging from 20 Hz to 250 kHz
  The higher frequency available with the MS5800R extends the RFT inspection to thinner materials with lower permeability, such as the stainless steel 400 series and other ferromagnetic alloys.
• High-speed MFL inspection
  The MFL technique is a good complement to RFT inspection. R/D Tech® high-saturation probes offer very good performance in tubes ranging from 0.75 in. to 1.5 in. in diameter.

MultiScan MS-5800U IRIS Key Features

• Setup wizard
  Simplifies equipment calibration for different tube diameters and materials. The wizard also generates the reporting code for the inspection.
• Real-time gain and gate controls
  UT settings can be modified during the C-scan acquisition to quickly optimize signal detection.
• Real-time and continuous color C-scans
  No missed flaws caused by operator fatigue with C-scan displays. Enhance the quality and appearance of your reports by including color maps and cross-section views of defects.
• Full tube length recording capability
  Analyze data offline and assess damages with the customer.

Software

Multiview is a powerful analysis software for tubing inspection with features:

• Voltage plane theoretical curve
• Circumferential sizing overlay
• Calibration of three depth curves with only one reference point
• Voltage plane calibration without a support plate signal
• Dual-driver software control
• Offline cylindrical view
• Pit depth measurement cursors
• Display of wall loss (%) and remaining wall
• Real-time C-scan acquisition
  

Probes

R/D Tech designs and manufactures hundreds types of tubing inspection probes for different requirements such as integral cable or detachable bobbin probe, air-conditioning probe, magnetic bias bobbin probe, flexible bobbin probe, single or dual exciter RFT probe, RFT Boiler probe, Flexible RFT probe, integral cable or detachable high saturation MFL probe, IRIS probe, adapter, probe cables, etc.